Electric skateboarding is both fun and practical. It lets you move quickly and with ease. Most electric skateboards go 20-25 MPH, but the speed can vary. This depends on the motor, battery, and how the board is made. If you want to boost your board’s speed, you need to know how each part works together.
Using bigger wheels can cover more ground with each turn. A fully charged battery provides maximum power. Keeping your skateboard well-maintained also helps it go faster. Remember, safety should always come first, especially at higher speeds when it’s harder to control the board.
Key Takeaways
- Top speeds for premium electric skateboards range from 15 to over 25 MPH.
- Brushless hub motors in the 3000+ watt range are recommended for optimal electric skateboard performance upgrade.
- Lithium-ion battery configurations of at least 10S provide a nominal voltage of around 36V-42V.
- Modifying the gear ratio can significantly impact top speed.
- Larger wheel diameters (110-120mm) can theoretically allow for faster electric skateboarding.
Understanding Your Electric Skateboard’s Components
Understanding your electric skateboard’s performance means looking closely at its parts. The motor, wheels, and more affect how fast and smooth your ride is.
The motor is key. Motors can range from 250 watts to 3000 watts. More watts mean more speed and better acceleration. Dual motors add even more power, helping you go fast, even uphill. The efficiency of your motor makes your ride faster.
Then there’s the battery. A higher voltage battery gives more power for speed and distance. But, remember to keep the battery charged for the best performance. How the battery works with other parts affects speed. Also, regenerative braking helps save battery life for longer, faster rides.
Wheels also matter a lot. Bigger wheels can lead to faster speeds because they roll more easily. But they might need more power to get moving. Wheel hardness and proper tire pressure can impact speed too. Soft wheels slow you down more than hard ones.
The ESC (Electronic Speed Controller) controls power from the battery to the motor. A good ESC improves speed and acceleration. Rider weight and experience affect performance too. Heavier riders may find they go slower. For more on upgrading, check this guide on how much an electric longboard costs.
Lastly, keeping your skateboard well-maintained is crucial. Clean wheels, proper tire pressure, and regular checks keep it running fast. This care helps your parts last longer and your skateboard go faster.
Modifications to Increase Speed
To make your electric skateboard faster, you can try a few key changes. One important change is electric skateboard modifications to use bigger wheels. Going for wheels between 110-120mm is good because they cover more ground every time they turn. This also lets your skateboard roll easier over bumps, making it go faster.
Another smart move is to upgrade your battery. Most skateboards use 7S or 8S batteries, but a 10S setup, which has about 36V-42V, can give you more power and speed. Using a 36V or 48V system helps your skateboard go faster than the usual 24V setup.
Also, getting a stronger motor, like one that’s 3000+ watts, especially if it’s a brushless hub motor, can really boost your acceleration and max speed. Putting in dual motors is another trick. It not only makes your ride faster especially uphill but also gives better power spread.
Adjusting your gear ratio is key to enhancing skateboard speed too. Using bigger wheel pulleys and smaller motor pulleys helps a lot. It’s important to tweak your electronic speed controller (ESC) settings as well. This includes changing how much torque it gives out, its acceleration, how it brakes, and its top speed limit, to make your skateboard run better.
Lightening your load can also make a big difference. Lowering rider weight can mean quicker take-offs and faster speeds, just like Newton’s Second Law says. Using light materials such as aluminum or carbon fiber for parts can help speed you up too.
Make sure all changes you make fit well with your skateboard’s parts to avoid any problems. Keeping things like bearings, tire pressure, and electricals in check is crucial for keeping your skateboard running well and safe.
Optimizing Your Riding Techniques
Getting better at skateboarding means you ride more efficiently and perform better. One key is to cut air resistance by how you position your body. By bending your body closer, you face less drag. This lets you go faster without trying as hard.
Balance your weight between your front and back foot to stay stable and keep going fast. This balance is especially crucial when you’re speeding, as losing it can make you wobble or even crash. Choosing to ride on smooth, flat roads is best. It lets you go faster and causes less wear on your board.
A lighter skateboard picks up speed faster and climbs hills better. Also, keeping your tires full can cut down on friction and resistance. This not only ups your speed but saves battery. But, if your tires are low, your battery will run out quicker due to increased friction.
Simple tricks to go faster can also make your electric skateboard last longer. Sticking to a moderate speed saves battery, as going too fast uses it up more. Regularly checking your skateboard, like the tire pressure, also helps improve your ride.
| Modifications | Impact on Speed |
|---|---|
| Upgrade from 10s to 6s battery | Increase top speed from 16-18 mph to 20-25 mph |
| Change wheel diameter from 80mm to 97mm | Increase top speed by 2-3 mph |
| Weight reduction | Faster acceleration and better hill handling |
| Proper tire inflation | Reduced friction and extended battery life |
Maintenance Tips for Peak Performance
Keep your electric skateboard running smoothly by following some simple electric skateboard maintenance tips. Use a soft brush and a microfiber cloth to remove dust and debris. This will make your rides smoother and your skateboard will last longer. It’s also important to check for loose screws and uneven wheels often. Over 60% of electric skateboard problems come from not tightening hardware, so make sure to do this before you ride.
Battery care is key for your skateboard’s health. Try to keep your lithium-ion batteries charged between 20% and 80%. Charging your skateboard before it falls below 20% will help it last longer. When you’re not using it for a while, keep the battery half charged and store it where it’s cool but not cold.
Fixing problems quickly is important for your skateboarding safety and the lifespan of the board. Keep the motors clean and well-oiled to avoid overheating. Regular skateboard cleaning and replacing parts like wheels or bearings will keep your rides smooth and safe.
Be careful with your skateboard in bad weather. Keep it away from too much heat or cold, and always make sure it’s dry. Water hurts the electronic and mechanical parts, cutting the battery’s life in half. Lastly, always use the right charger and don’t leave it charging all night to avoid overcharging.
Safety Considerations When Increasing Speed
Boosting the speed of your electric skateboard is exciting. Yet, it’s crucial to think about safety. As the speed goes up, so does the danger. Wearing the right safety gear, like helmets, knee pads, and wrist guards, is key. Helmets can lower the risk of head injuries by up to 85%. Wrist guards reduce wrist injury risks by 25%.
It’s also important to know what you can handle. Jumping too fast into high speeds can cause crashes. This is because controlling and balancing the board gets harder at 20-25 MPH. If you’re starting out, practice in a safe spot. This helps you get used to how your board moves. Learning how to quickly stop can also improve your reaction time by 40%. This skill is vital for dodging sudden obstacles.
Before speeding off, do a safety check on your skateboard. Regular upkeep, like cleaning the wheels and bearings, can make your board 30% better. Ensure your wheels have enough air to reduce drag. Studies show that riders who do these checks cut accidents by half. Lastly, know and follow your local traffic rules and speed limits. Many places fine those who speed.
I’m John Peterson, a passionate skater, blogger, and lifelong enthusiast. I’ve been skating for over 9 years and have gone on to write a blog dedicated to the sport of skating and its culture. Through my blog, I strive to share my knowledge and experience of the sport with all who are interested. From beginner tips, tricks, and equipment reviews to interviews and event coverage, I cover it all. So read my blog as I explore the wonderful world of skating!