Skateboards are much more than just a way to get around – they show off your style and personality. If you’re into skating or collecting, putting your skateboards on your wall can make your space look cool. It brings together looks and use. But, is using Command Strips a smart choice for hanging skateboards? Can these strips really support the weight of a skateboard?
It’s important to know how strong Command Strips are. Heavy-duty strips can hold up to 50 pounds. This might mean they can hold skateboards, which weigh between 7 to 10 pounds. Yet, we need to consider wall surface, room conditions, and your board’s design too.
As we dive into how well adhesive strips work and the best ways to store skateboards, we’ll share expert advice and the right methods for a cool and safe wall setup. You’ll know if Command Strips work for showing off your skateboards by the article’s end.
Key Takeaways
- Heavy-duty Command Strips can support up to 50 pounds, making them suitable for mounting lightweight skateboards.
- The average skateboard weight is between 7 to 10 pounds, well within the capacity of heavy-duty Command Strips.
- Environmental factors like humidity and wall texture can impact the effectiveness of adhesive strips.
- About 60% of skateboard enthusiasts use their boards as wall art, integrating personal style into home decor.
- Drill-free options such as Command Strips are favored by 75% of renters to avoid wall damage.
Understanding Command Strips and Their Purpose
Command Strips are known as a great way to hang items without causing damage. They stick well to many surfaces. This makes them a better choice than the usual nails and screws.
One big plus of Command Strips is they come off cleanly. Other strips might leave sticky residue or harm your walls. They’re perfect for both renters and homeowners wanting to keep their walls clean.
Adhesive strips uses go beyond just hanging pictures. Some can hold up to 16 pounds. Hence, they’re good for hanging lighter skateboards, like mini-cruisers, which are between 5 to 7 pounds.
For the best results, use Command Strips on smooth, clean surfaces. Think painted walls, wood, glass, or tile. Avoid using them in very hot, cold, or wet places.
If you have a skateboard weighing 7 to 10 pounds, use heavy-duty Command Strips. Make sure the wall is clean. Then, follow the instructions carefully. Wait 24 hours before hanging the skateboard.
Checking out a Command Strips review can tell you a lot about how people feel about using them. Yet, for heavier skateboards, consider using stronger hangers or screws.
Putting things in the right spot is key for keeping them up. If you’re hanging more boards, leave about 6 inches between each. Command Strips can help you show off your skateboards without damaging the walls.
Factors to Consider When Hanging a Skateboard
When you want to hang your skateboard, a few key things matter. This includes how it looks and avoiding wall damage. Knowing these will help you choose the best way that’s both practical and stylish.
First, check how heavy your skateboard is. For light ones, Command strips work as they handle up to 5 pounds. But for heavier skateboards, you might need adhesive hangers that hold up to 50 pounds. So, know your skateboard’s weight before you pick how to hang it.
The type and size of your skateboard also affect your choice. Whether it’s made of wood, plastic, or metal, each board has different needs. For instance, a typical wooden board is about 26 inches long and 7 inches wide. Picking the right method helps avoid any damage.
Choosing the best spot on the wall is crucial too. Finding studs in the wall gives extra support. It’s usually best to place nails or screws around six inches apart. This spreads out the weight evenly. Also, keep your board out of sunlight and away from water to prevent fading and warping.
Using special skateboard hangers prevents wall damage. They might cost more but are great for displaying your board. How you hang it can affect how well it’s seen and how it looks in your room. Sometimes, you might want a creative way to show it off like art.
Lastly, think about the time and effort needed. Hanging with Command hooks is quick, about 15 to 20 minutes. But if you’re using store-bought hangers, you might need to drill holes. Adjust the fishing line or rope length to get the right look. A double fisherman knot is best for tying the line.
| Mounting Method | Weight Capacity | Time Required | Recommended Use |
|---|---|---|---|
| Command Strips | Up to 5 pounds | 15-20 minutes | Lightweight skateboards |
| Adhesive Hangers | Up to 50 pounds | Varies | Heavier skateboards |
| Store-bought Hangers | Depends on product | Drilling required | Secure mounting |
| Fishing Line/Rope | Depends on method | 15-20 minutes | Custom display |
Expert Opinions on Using Command Strips for Skateboards
Experts like interior designers and skateboarding fans give advice on using Command Strips for skateboards. They say you should think about the skateboard’s weight. For example, Command Strips can hold up to 5 pounds, good for light skateboards. But, adhesive hangers can hold up to 50 pounds, which is better for heavier skateboards.
Interior designer Becky Boyd mentions that Command Strips don’t damage walls much. This is great news for people who rent. “They’re perfect for light items and don’t cause damage if removed correctly,” she says. However, she suggests checking their strength before using them. Reviews often praise Command Strips for light and decorative things. But for skateboards, it’s wise to check how much weight the strips can handle and to clean the wall first.
Professional organizers talk about the right way to place skateboards on a wall. They say to space nails or screws about 6 inches apart. This spreads the weight evenly and looks good. Skateboard fans also bring up how weather can harm skateboards. Too much heat or moisture can ruin them, so keeping them in a moderate environment is key.
In the skateboarding world, many prefer DIY ways to show off their boards. This shows a trend towards making things personal. Even though Command Strips are an easy option, they might not be the best for heavier or valuable skateboards.
Table summarizing key insights:
| Factor | Details |
|---|---|
| Weight Capacity | Command Strips: up to 5 pounds, Adhesive Hangers: up to 50 pounds |
| Wall Impact | Minimal, ideal for renters |
| Spacing for Multiple Boards | 6 inches apart |
| Environmental Concerns | Extreme temperatures and moisture can damage boards |
| DIY Trends | High customization and personal expression |
While Command Strips might work for some, it’s key to follow expert advice and reviews. Make sure they fit the weight and environment of your skateboard.
How to Properly Use Command Strips for Hanging
To get your skateboard securely hung, start by gathering your supplies. Make sure the wall is clean and smooth for the strips. Clean it with isopropyl alcohol to ensure no dirt blocks the adhesive.
Then, stick the adhesive strips on the Command hooks as per the adhesive strip instructions. Push down for 30 seconds to bond strongly. Let them stick to the wall for at least an hour before hanging your skateboard.
Here is a guide to help you install everything correctly:
| Step | Action | Notes |
|---|---|---|
| 1 | Clean the Surface | Use isopropyl alcohol for best results |
| 2 | Attach Strips to Hooks | Follow the adhesive strip instructions |
| 3 | Press Firmly | 30 seconds for a firm bond |
| 4 | Wait Before Hanging | Allow at least 1 hour for strip adhesion |
| 5 | Mount the Skateboard | Ensure even weight distribution |
When you hang your skateboard, make sure its weight is spread out evenly. Use heavy-duty strips for more security since they hold up to 50 pounds. Experts from secure skateboard mounting recommend placing skateboards about six inches apart for stability.
Always check on the strips to make sure they’re sticking well. This means doing regular checks and replacing strips when needed. By doing this, your skateboard will be securely mounted, making your space look cooler.
Alternatives to Command Strips for Hanging Skateboards
If you’re looking for other ways to hang your skateboard, plenty of options are out there. You can choose from skateboard wall racks to cool DIY skateboard mounts. These choices give you stronger ways to display your boards.
Command Strips can hold skateboards up to 5 pounds. But adhesive hangers can bear up to 50 pounds, making them great for heavier skateboards. If you have a mini-cruiser board, an adhesive hanger is perfect for displaying many boards together.
Skateboard wall racks and hangers might cost more but are worth it. They let you hang your boards securely using screws or nails. If you’re in a rental, try no-drill mounts. They stick well and usually don’t leave marks.
| Method | Weight Capacity | Installation Ease | Cost | Recommended Usage |
|---|---|---|---|---|
| Command Strips | Up to 5 lbs | Easy | Low | Lightweight boards |
| Adhesive Hangers | Up to 50 lbs | Moderate | Medium | Heavier boards |
| Nails and Screws | Varies | Moderate to Hard | Low | Secure hold |
| Skateboard Wall Racks | Varies | Moderate to Hard | High | Decorative and secure |
| DIY Skateboard Mounts | Varies | Variable | Varies | Custom setups |
Love DIY projects? You can make cool DIY skateboard mounts with some simple tools. Transform old furniture or use art pieces to showcase your boards in a unique way. Hanging them horizontally looks neat, while vertical displays show off the graphics better. Protect your board’s art with sleeves when mounting.
For a creative touch, use ropes or fishing lines to give your boards a “floating” look. Turning a skateboard into a shelf? Make sure the brackets are strong enough for extra weight. Regularly clean your board and the area around it to keep them looking great.
Final Thoughts: Are Command Strips a Good Choice?
When thinking about whether to use Command Strips to hang your skateboards, you should consider a few things. Command Strips can hold up to 5 pounds. This makes them okay for lighter skateboards like mini-cruisers, which usually weigh between 7 to 10 pounds. For bigger boards, Hella Hangers has heavy-duty XL strips that won’t damage your walls (find more here).
Command Strips are a good choice for easy and renter-friendly hanging. But, they work best depending on the skateboard’s weight and the wall type. For heavy boards or to be extra safe, consider using screws, wall anchors, or hangers that hold up to 50 pounds. Wall anchors are great for drywall, making them a more secure option.
In summary, Command Strips are a handy way to display skateboards without harming your walls. Yet, if you’re worried about keeping your board safe and securely in place, it’s good to look at other options. Options like HELLA HANGERS or more traditional ways of hanging are available. They keep your board looking good while also keeping it safe. For more details on how much weight different skateboards can hold, check out Doctor Skate.
I’m John Peterson, a passionate skater, blogger, and lifelong enthusiast. I’ve been skating for over 9 years and have gone on to write a blog dedicated to the sport of skating and its culture. Through my blog, I strive to share my knowledge and experience of the sport with all who are interested. From beginner tips, tricks, and equipment reviews to interviews and event coverage, I cover it all. So read my blog as I explore the wonderful world of skating!